Join our mailing list!







Youdoitstore, Garage Door Repair, Perrysburg, OH


(Your shopping cart is empty)
You are here: Home > Liftmaster > Liftmaster Commercial Openers
Choose a sub category:
Liftmaster Opener Parts
Liftmaster Commercial Garage Door Operators, Parts
Youdoitstore can provide garage door remotes, keyless entries, control panels, receivers, logic boards, replacement parts nearly any Liftmaster garage door opener. Orders placed by 1:00 PM Eastern Time are shipped the same day.

Liftmaster

Commercial
Operators
Photo
Cell Kits

Brake
Solenoids

Brake
Transformers

Relays

Logic Boards
liftmaster operators liftmaster photo cell kits liftmaster solenoids liftmaster brake transformers liftmaster relays liftmaster logic boards  

Helpful Links
 

Need a Liftmaster Instruction Manual? (click here)

     
Need help finding your model number? (pdf)
Liftmaster Troubleshooting (click here)

Please thoroughly read and understand all instructions before attempting any garage door repair.
CAUTION: Garage door springs, cables, brackets, and other hardware attached to the springs are under very high tension and, if handled improperly, can cause serious injury or death. Do not attempt any repairs without the proper tools, instructions and safety equipment. If you have any doubts about your ability to perform the work safely, please contact a door professional to complete your repair.
Sort By:
Page of 1
LIGHT DUTY JACKSHAFT OPERATOR
LIFTMASTER 3900 LIGHT DUTY JACKSHAFT OPERATOR
List Price: $392.00
Our Price: $239.99
You save $152.01!

  • Motor: Heavy-duty 24VDC motor provides ultra-quiet operation, along with variable speed smooth start and stop.
  • Rated up to 10 cycles per hour.
  • For doors up to 14 feet high, 18 feet wide or 180 square foot maximum
  • Maximum allowable door weight is 650 lbs.
  • Compact Design: Ideal for limited height, cathedral, or obstructed ceiling installations; mounts mounts on the left or right side of door and attaches to the torsion bar.
  • Includes: APBS Single Button Control Station: OPEN & CLOSE functions with type B2 control wiring is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Includes: The Protector SystemŽ Safety Sensors: A "non-contact" photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
  • Warranty: Lifetime motor warranty
  • Download 3900 Sell Sheet

LIFTMASTER 3950 JACKSHAFT OPERATOR
List Price: $445.00
Our Price: $270.00
You save $175.00!

  • Motor: Heavy-duty 24VDC motor provides ultra-quiet operation, along with variable speed smooth start and stop.
  • Rated up to 10 cycles per hour.
  • For doors up to 12 feet high, 14 feet wide
  • Maximum allowable door weight is 650 lbs.
  • For commercial rolling sheet doors with live or dead shaft
  • Universal Handing: The 3950 operator can be mounted to either the right or left-side of the door without the need for any special accommodations.
  • Includes: APBS Single Button Control Station: OPEN & CLOSE functions with type B2 control wiring is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Includes: The Protector SystemŽ Safety Sensors: A "non-contact" photo safety sensor designed to sense an obstruction and signal the door operator to reverse to open.
  • Warranty: Lifetime motor warranty
  • Download 3950 Sell Sheet

LIFTMASTER MH MEDIUM DUTY HOIST OPERATOR
LIFTMASTER MH5011UR MEDIUM DUTY HOIST OPERATOR 1/2HP 115V W/CPS-U
List Price: $721.00
Our Price: $475.00
You save $246.00!

  • Motor: Powerful 1/2 HP, 115V single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Emergency Manual Operation: Model MH provides easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism.
  • Brake: Heavy-duty solenoid actuated brake standard.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Drive Reduction: First stage heavy-duty 4L V-belt; second and third stages #48 chain.
  • Bearings: Heavy-duty oil-filled bearings.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with baked-on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+¨ remote controls and unlimited DIP switch remote controls.
  • Friction Clutch: Adjustable friction clutch helps protect against damage to the door and operator should the door meet an obstruction.
  • Warranty: 2-year warranty.
  • .
LIFTMASTER COMMERICAL MJ JACKSHAFT OPERATOR
LIFTMASTER MJ5011U COMMERICAL JACKSHAFT OPERATOR 1/2HP 115V W/CPS-U
List Price: $661.00
Our Price: $450.00
You save $211.00!

  • Motor: Powerful 1/2 HP, 115V single phase motor with instant reverse and internal automatic reset thermal overload. Removable without affecting limit switch settings.
  • Operator/Motor Control: Solid-state Medium-Duty circuit board.
  • Control Circuit: 24V NEC Class 2.
  • Floor Level Disconnect: Floor level disconnect provides emergency manual operation.
  • Brake: Heavy-duty solenoid actuated brake standard.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop with constant contact to close. Momentary contact to close (B2 wiring) can be easily set, but requires the presence of either CPS-U, CPS-UN4, or CPS-EI safety devices. The operator is pre-wired to accept a sensing device, photoelectric control, radio controls and most types of access control equipment.
  • Drive Reduction: First stage heavy-duty 4L V-belt; second stage and third stages #48 chain.
  • Push Button Station: 3-button station for OPEN/CLOSE/STOP functions is standard for all operators. Controls with 1, 2 and 3 buttons are available.
  • Construction: NEMA 1 Type electrical box, heavy-duty 11-gauge steel frame with durable baked-on powder coat finish, all reduction sprockets drilled and pinned to shafts.
  • Friction Clutch: Adjustable friction clutch helps protect against major damage to door and operator should the door meet an obstruction.
  • Radio Receiver: 315MHz radio receiver is integral to the Medium-Duty logic board. Accepts up to 20 Security+® remote controls and unlimited DIP switch remote controls.
  • Warranty: 2-year warranty.
  • .
LIFTMASTER COMMERICAL J JACKSHAFT OPERATOR
LIFTMASTER J5011L4 COMMERICAL JACKSHAFT OPERATOR 1/2HP 115V W/CPS-U
List Price: $843.00
Our Price: $530.00
You save $313.00!

  • Motor: Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Removable without affecting limit switch settings.
  • Drive Reduction: First-stage heavy-duty 5L V-belt; second and third stages #48 chain; #50 drive chain.
  • Emergency Disconnect: Easy emergency manual operation using an electrically interlocked floor level disconnect.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop, with constant contact to close; D1 and E2 wiring are also available. Momentary contact to close (B2 wiring), T, TS, and FSTS wiring can be activated with the use of CPS-U, CPS-UN4, or CPS-EI safety edge interface. The operator is pre-wired to accept a sensing device, photoelectric sensors, radio controls and most types of access control equipment.
  • External Radio Control Terminal: Quick, convenient connections for retrofitting or adding radio controls on logic or mechanical operators.
  • Bearings: Industrial ball bearings on a 1" output shaft; heavy-duty oil-filled iron bearings on reduction shafts.
  • Friction Clutch: Adjustable, helps protect against major damage to door and operator should the door meet an obstruction.
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
  • Push Button Station: 3-button station comes standard and has OPEN/CLOSE/STOP functionality.
  • PosiLock® Mechanical Brake System: Self-locking mechanical reduction system that functions as a holding brake.
  • Warranty: 2-year warranty.
  • .
LIFTMASTER H MEDIUM DUTY HOIST OPERATOR
LIFTMASTER H7511L4R MEDIUM DUTY HOIST OPERATOR 3/4HP 115V W/CPS-U
List Price: $1,050.00
Our Price: $625.00
You save $425.00!

  • Motor: Continuous-duty high-starting torque motor with instant reverse and overload protection. Available in 1/3, 1/2, 3/4 and 1 HP; single- or three-phase. Removable without affecting limit switch settings.
  • Drive Reduction: First-stage heavy-duty 5L V-belt; second and third stages #48 chain; #50 drive chain.
  • Emergency Disconnect: Easy emergency manual operation using an electrically interlocked floor level disconnect and hoist mechanism.
  • Wiring Type: All operators are factory preset to C2 wiring providing momentary contact to open and stop, with constant contact to close; D1 and E2 wiring are also available. Momentary contact to close (B2 wiring), T, TS, and FSTS wiring can be activated with the use of CPS-U, CPS-UN4, or CPS-EI safety edge interface. The operator is pre-wired to accept a sensing device, photoelectric sensors, radio controls and most types of access control equipment.
  • External Radio Control Terminal: Quick, convenient connections for retrofitting or adding radio controls on logic or mechanical operators.
  • Bearings: Industrial ball bearings on a 1" output shaft; heavy-duty oil-filled iron bearings on reduction shafts.
  • Friction Clutch: Adjustable, helps protect against major damage to door and operator should the door meet an obstruction.
  • Construction: NEMA 1 type electrical box, heavy-duty 11-gauge steel frame with durable powdercoat finish, all reduction sprockets drilled and pinned to shafts.
  • Push Button Station: 2-button station for OPEN/CLOSE functions is standard with D or D1 wiring. 3-button station is standard with B2 or C2 wiring.
  • PosiLock ® Mechanical Brake System: Self-locking mechanical reduction system that functions as a holding brake.
  • Warranty: 2-year warranty.
  • .
WALL MOUNTING BRACKET FOR SIDE MOUNT OPERATORS
WALL MOUNTING BRACKET FOR SIDE MOUNT OPERATORS 109099
Our Price: $45.00

WALL MOUNTING BRACKET FOR SIDE MOUNT OPERATORS
COMMERCIAL PHOTO CELL KIT
LIFTMASTER CPS COMMERICAL PHOTO CELL KIT
Our Price: $129.99

LIFTMASTER COMMERICAL PHOTO CELL KIT
INDUSTRIAL PHOTO CELL KIT
LIFTMASTER CPSN4 INDUSTRIAL PHOTO CELL KIT
Our Price: $169.99

LIFTMASTER INDUSTRIAL PHOTO CELL KIT
COMMERCIAL PHOTO CELL KIT
LIFTMASTER CPSU COMMERICAL PHOTO CELL KIT
Our Price: $119.99

LIFTMASTER COMMERICAL PHOTO CELL KIT
   
 
www.youdoitstore.com

 About Us
 Contact Us
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © youdoitstore.com. All Rights Reserved.
Built with Volusion